High Quality Double tension clamp
mposition: structural reinforcement strip, middle stranded wire, outer stranded wire, embedded ring, triangular joint plate, connecting hardware (U-shaped hanging ring, adjustment plate), structural fasteners, etc.
Purpose: To bear full tension. Connect the optical fiber composite ground wire to the terminal, strain-resistant or optical cable connection tower.
Features:
1. It has all the properties of a strain clamp.
2. The use of two layers of outer twisted wires improves the mechanical strength and air grip of the clamp, and is often used in special pitches such as large spans and high drop. According to customer needs, the grip strength can reach over 160KN.
Order notice:
Same as strain clamp.
Specification and model parameters of pre-twisted OPGW optical cable double tension clamp with a grip strength of 160KN
| Model | Applicable optical cable diameter range D (mm) | Structural reinforcement | Inner skein | Outer skein | Clamp weight (kg) | ||||||
| length (mm) | Wire diameter (mm) | The number of (mm) | length (mm) | Wire diameter (mm) | The number of (mm) | length (mm) | Wire diameter (mm) | The number of (mm) | |||
| OSNZ－13.6～14.9－160 | 13.6～14.9 | 2400 | 2.7 | 15 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.0 |
| OSNZ－15.0～15.9－160 | 15.0～15.9 | 2400 | 2.7 | 15 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.1 |
| OSNZ－16.0～16.9－160 | 16.0～16.9 | 2400 | 2.7 | 16 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.2 |
| OSNZ－17.0～17.9－160 | 17.0～17.9 | 2400 | 2.7 | 17 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.3 |
| OSNZ－18.0～18.9－160 | 18.0～18.9 | 2400 | 2.7 | 18 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.4 |
| OSNZ－19.0～19.9－160 | 19.0～19.9 | 2400 | 2.7 | 19 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.5 |
| OSNZ－20.0～21.0－160 | 20.0～21.0 | 2400 | 2.7 | 20 | 1800 | 4.0 | 7 | 1600 | 4.0 | 7 | 15.6 |
| Note: 1. The meaning of the model and the number, O-suitable for OPGW optical cable; SNZ-double tensile clamp; number-suitable for the outer diameter of the optical cable and the grip strength of the clamp. | |||||||||||
| 2. When the customer requires the grip strength of the OPGW cable clamp to be greater than 160KN or has special requirements, the company can design and supply according to the customer's actual circuit requirements. | |||||||||||